XFyre™ Condensing
Boilers & Water Heaters
Raypak is proud to introduce the all new XFyre Modulating, Condensing Boiler in sizes from 300 to 850 mbtu. Achieves 94% Thermal Efficiency at full fire, up to 99% part load. Indoor and Outdoor construction is standard. Certified for PVC, CPVC, and SS venting. Indoor combustible clearance requirement is zero right and left side, access area needed for front and rear. With top water connections and a minute 9.5 sq. ft. footprint two XFyres can fit in the space often required for one from other sources.

A DSI ignition system combined with zero governor fuel air matching allow smooth soft start, and modulation with 5:1 turndown capability. Stainless Steel heat exchanger with ASME H Stamp. Meets LoNOx requirements for any jurisdiction. Digital Operating Controls including 0-10 VDC inputs from BMS, and up to 8 boiler cascade capability are standard. An easily read LCD Status Display, Full Diagnostics, and Fault Memory complete the exceptional highlights of this powerful new Raypak offering.

• 3 models - 300,000, 500,000 and 850,000 BTUH
• Up to 94% efficiency (Cat.IV) hydronic boiler
• Up to 94% efficiency (Cat. IV) domestic hot water UP to 99% part load
• Standard unit configuration can be vented with PVC
  
• Small footprint design, less than 9-1/2 square feet, fits tight spaces and easily replaces larger boilers
  
• Onboard diagnostic center, real English, no cryptic codes MORE INFO!
• Fully UV protected and weather proof control panel - conveniently located and easy to use
  
• Minimum inlet temperature - above 32°F
• Modulating gas valve and burner, up to 5:1 turndown.
  
• All models indoor and outdoor certified-XFyre is the only condensing boiler with CSA outdoor approval
  
• Complete cabinet protects all controls and wiring
  
• Meets all current Low NOx regulations, including the new 2010 SCAQMD revisions
• Suitable for altitudes up to 2,000 ft.
  
• All models equipped with 316L stainless steel heat exchanger - ASME H stamped
• 0-10 VDC inputs for BMS interface
• 8-boiler cascade capability - Standard equipment
  
  
  Options
  
• Temp-Tracker Mod+ – Controls up to 16 Raypak XFyres, XTherms and MVBs
  (See Cat. # 5100.22)
• Direct Vent capability using TruSeal™ combustion air inlet kit - option D-21
• Condensate Neutralizer Kit - option Z-12

For complete product literature see the Document Library