Raytherm Indoor Pool Heaters, 962-1826

Raypak's Raytherm® line of atmospheric pool heaters offers rugged construction and simple operation at low cost.

Raytherm Indoor Pool Heaters, 962-1826

BASIC PRODUCT DATA

BASIC DATA
Model Number
Full Input BTUH
Indoor Stack Dia.
Bypass Options
Unitherm Governor
H-Style Bypass None (Field-Supplied) CWR
P-962 961,700  14" STD, no pump
Yes Yes Yes
P-1125 1,124,700  16" STD, no pump Yes Yes Yes
P-1223 1,222,500  16" STD, no pump Yes Yes Yes
P-1336 1,336,600  18"
STD, rear pump
Yes Yes
P-1468 1,467,000  18"
STD, front pump
Yes Yes
P-1631 1,630,000  18"
STD, front pump Yes Yes
P-1826 1,825,600  20"
STD, front pump Yes
Yes


Features:
  • Rugged All-Brass Headers
    Resist corrosion, and are easily removed for inspection or service. AB 1953 low-lead complaint.
  • Cupro-nickel Finned-tube
    Single bank, straight through design delivers lowest pressure drop. Integral fins have ten times the heat transfer surface of plain tubes.  Cupro-nickel tubes provide superior chemical resistance over copper for tough commercial installations.
  • On-off Operation.
  • Corrosion Resistant Steel
    Fittings are brushgalvanized against rust. Heat shields are corrosion-resistant steel. Jacket has Polytuf powder coat finish.
  • 24-Volt Controls
    Are totally enclosed for protection. Cover is easily removed for inspection and service.
  • Floating Return Header
    Immunizes heat exchanger to thermal shock.
  • Tube Sheet and “O” Ring Construction
    Eliminates the repair and maintenance problems associated with rolling tubes directly into a casting.
  • Interlocking Refractory Panels
    With sealed corners reduce radiation losses.
  • Stainless Steel Burners
    Maintain precise combustion, burn quietly and won’t clog or corrode.
  • Slide-out Burner Tray
    Allows easy inspection and service.
  • Spark-to-Pilot Ignition
    The most dependable ignition method available. 
  • Available for natural gas or propane.
Bypass Options:
  • Unitherm Governor (std on 962-1223)
    This provides a temperature-activated valve inside the header which varies flow through the heat exchanger.  No pump on the heater.  Flow comes from an external source.
  • H-Style Bypass (std on 1336-1826)
    This provides a larger manually-set bypass to bring heated water back to the inlet, raising the temp inside the heat exchanger.  For size 1336, the H-bypass is horizontal with a rear-mounted pump.  For sizes 1468-1826, the H-bypass is vertical with a front-mounted pump.
  • None (field-supplied)
    Protection provided by others and mounted in the field.
  • Cold-Water Run (CWR)
    This approach uses digital controls to vary the performance of a variable-speed pump which governs how much heated water is returned to the inlet.  Performance is adjusted in real time.

By continuing to use this website, you agree to our use of cookies. For more information, see our Privacy Statement.

OK